Y-cam Knight Uživatelský manuál stáhnout pdf (Strana 30)

8.3 FTP Alarm Setup

NOTE: the above settings are for testing and illustration purposes only. If you require the password for

this account in order to test the operation of the camera please e-mail us on [email protected]

Most of the above settings are not the default settings of the Y-cam.

[Motion detection] Enable or Disable FTP upload upon motion detection.

[Periodical send] Enable or Disable FTP upload periodically.

[Interval time] Type the interval at which you want to upload the image.

[FTP server name] Type the name or IP address of the FTP server.

[FTP server port] The default port number is 21.

[Anonymous] Enable or disable anonymous login.

[User name] Type your user name

[Password] Type your password

[Re-type password] Re-type your password

[Passive mode] Switch passive mode on or off.

[Remote path] Path where to save the image file on the FTP server.

Click Apply to confirm your settings.

The Y-cam Knight can also upload an image to an FTP server upon receiving an alarm from the motion

detector window or at specific time intervals.

FTP is a commonly used protocol for exchanging files over any network or internet and there are a

number of FTP providers which will allow you to upload the images free of charge.

Eg. http://free.prohosting.com would have the following settings for account name “ycamuk” uploading an

image every 1 hour 1 minute 10 seconds i.e. Every 3670 seconds.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 46 47

Žádné komentáře

Y-cam Knight Uživatelský manuál Strana 30